{"product_id":"bound-base-pro-vehicle-full-kit-6-10mm","title":"Bound Base PRO Vehicle Full Kit - 6-10mm","description":"\u003cp\u003eThe \u003cstrong\u003eBound Base PRO Vehicle Full Kit\u003c\/strong\u003e combines binder and 6–10mm aggregate for a permeable resin driveway base. Use it beneath the decorative resin bound surface as part of the specified reinforced system for vehicle applications.\u003c\/p\u003e\u003ch3\u003eWhat is Bound Base PRO?\u003c\/h3\u003e\u003cp\u003eBound Base PRO is a resin bound base course that provides a stable, permeable foundation beneath decorative resin bound surfacing. It combines Resin Mill’s single-part polyurethane binder with specified aggregates and is installed with 50kN structural reinforcement mesh above and below the base layer.\u003c\/p\u003e\u003cp\u003eDesigned as an alternative to a traditional asphalt or concrete base course, it forms part of the complete surface construction. It sits above a properly prepared, free-draining sub-base and beneath the decorative resin bound finish.\u003c\/p\u003e\u003ch3\u003eWhy use Bound Base PRO?\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eA permeable foundation:\u003c\/strong\u003e the base allows water to pass through into a suitably designed sub-base and drainage system.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuicker progression on site:\u003c\/strong\u003e a typical overlay time of 2 to 6 hours helps installers move on to the decorative surface. Catalyst can accelerate curing to help complete the full installation on the same day, subject to site conditions.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStraightforward mixing:\u003c\/strong\u003e the single-part binder avoids measuring and combining separate resin components. Catalyst is added when required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReinforced construction:\u003c\/strong\u003e the system uses 50kN Structural Reinforcement Mesh above and below the base course to help distribute loads and improve crack resistance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eBound Base PRO is a base layer, not the finished wearing surface. Ground preparation, sub-base design and drainage must suit the site and intended traffic. Follow the full Resin Mill system specification.\u003c\/p\u003e\u003ch3\u003eKit contents\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e1 × 4.5kg Bound Base PRO binder in an 11 litre bucket\u003c\/li\u003e\n\u003cli\u003e4 × 25kg 6–10mm Bound Base Aggregates (100kg total)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eCoverage\u003c\/h3\u003e\u003cp\u003eApproximately 2.5m² per kit.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCoverage assumes a capping layer is used. Without a capping layer, coverage will be approximately 10–15% lower. The calculator uses the stated coverage and does not adjust for this reduction.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMix 4.5kg of Bound Base PRO binder with 100kg of aggregate. Add 5kg of Binding Quartz for all heavy traffic and commercial applications.\u003c\/p\u003e\u003cp\u003eThe 4.5kg binder is supplied in an 11 litre bucket to allow space for mixing in catalyst. Catalyst is required below 15°C. It can also be used at all temperatures within the product’s application range where faster curing is required to help complete the full installation on the same day. Suggested dose: 1ml per 4.5kg binder pack.\u003c\/p\u003e\u003cp\u003eAllow approximately 2–6 hours before overlaying, depending on temperature and site conditions. Follow the Bound Base PRO installation guide.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCatalyst and 50kN reinforcement mesh are not included and must be ordered separately.\u003c\/strong\u003e Capping-layer materials and the decorative resin bound top layer are also not included.\u003c\/p\u003e","brand":"Resin Mill","offers":[{"title":"30mm","offer_id":56326425018753,"sku":"BBVEFK","price":42.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0781\/0429\/7753\/files\/boundbasedrivewaykit.png?v=1790597659","url":"https:\/\/resinmill.co.uk\/products\/bound-base-pro-vehicle-full-kit-6-10mm","provider":"Resin Mill","version":"1.0","type":"link"}