Category_New Products

Colour Cast - The Only Anti-Slip To Be Using For Resin Driveways

Colour Cast - The Only Anti-Slip To Be Using For Resin Driveways - Resin Mill

The Issue With Anti-Slip Crushed Glass

We all know the problem with anti-slip crushed glass. We’ve all been there before. We’ve all got the t-shirt. Time spent selling the drive, ordering the resin bound supplies, organising the install, laying the sub base for the resin, mixing the resin bound aggregates, laying the resin drive, scattering the anti-slip crushed glass….And then you stop. You realise that you have just scattered your anti-slip crushed glass…You can see the white area across the resin bound surface where you have scattered it. Oh dear. This is not an ideal situation. There is now no way of removing it…And you have to to explain to your client why there are white bits of visible anti-slip crushed glass on their driveway. Not the finish they ordered for their resin drive. This is a dilemma that even the most expert anti-skid caster faces at some point in their resin surfacing career.

Anti-Slip Crushed Glass Pro is perfect for some resin bound colours. However white will always show white. So if you can see white anti-slip crushed glass on the lovely newly installed resin drive, there is going to be a quality issue for your customer. Even if it is anti-skid. On the flip side, if you try stir away from the problem, you don’t want to spread the anti-slip too thinly across the resin surface. This is because it will adversely compromise the anti-slip properties of the resin bound surface. Ensuring a good looking but reliable anti-slip surface is relevant now more than ever. This is especially considering the past few days of snow across the UK and sub-zero temperatures still lurking cause slippy surfaces.

Colour Cast Pro Anti Slip For Resin Drives

How Colour Cast Pro Anti-Slip Can Help

With The Resin Mill always innovating, we have devised Colour Cast Pro. Colour Cast Pro is a range of specially selected coloured anti-slip that elevates the problem of white patches. We now have 4 different colours of anti-slip material that match corresponding resin bound aggregates. Contractors need not worry, as we have taken the pain out of deciding what colour goes with which resin mix. We have already done all the testing and ensured optimal aesthetic value for the anti-slip colours and aggregates. You can be sure to install truly stunning, seamless resin surfacing that has invisible ant-slip with our Colour Cast Pro range. Be sure to check with our sales office if you are unsure.

As with our traditional anti-skid product, Anti-Slip Pro, Colour Cast Pro is high friction and acts as a grit, ensuring the safety of your clients family, a workforce or pedestrians.

Colour Cast Pro is recommended with every single resin bound install in order to active the anti-skid properties of the resin bound material.

The Colour Cast Pro colours are: Glass, Carbon, Chestnut and Natural.

They are packed in easy to handle 5kg bags. This makes it easy to transport and add on to any of your orders. 100g/m² of Colour Cast Pro should be installed on resin drives and surfacing for the optimum slip resistance. It is easily installed, (as with any other anti-skid product), in a ‘cast on’ method. Install after trowelling your resin bound aggregates but before they set. You simply throw a handful of anti-skid material on evenly, as if feeding chicken. This time however, you can scatter in confidence. There is no need to worry about any patchiness on the surface of your resin and you can leave the job satisfied and with happy a customer. Colour Cast Pro could also twin up as a hybrid product, with contractors able to use it as fines to strengthen the resin bound mix.

So What Goes With What?

Crushed Glass Anti Slip For Resin Drives

Make sure your clients are safe this season and install Colour Cast Pro – the original product in the resin bound industry that allows for an invisible textured anti-skid finish. It is available only and exclusively at The Resin Mill.

For More Information Or To Try Our Colour Cast Pro Today, Call Our Sales Office On 01484 400 855.

Reading next

Resin Bound Surfacing Direct Has Finally Come To Town - Resin Mill
Cleaning Your Baron Forced Action Mixer - Resin Mill

Leave a comment

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.


Our cutting-edge training facility redefines learning, offering an immersive experience in resin bound and spray granite installations. Guided by industry experts, you'll access state-of-the-art equipment, honing your skills in a dynamic environment. From intricate techniques to innovative methodologies, this programme equips you with expertise unmatched in the industry. Become part of the elite installer programme, shaping the future of resin-bound surfaces with precision and innovation.


The Resin Mill have a purpose built resin bound training academy, Resin Training Academy, which delivers our market leading resin driveway courses. It is the first of its kind in the UK, devoting itself to educating and benchmarking high performance standards in the industry. The Resin Bound Academy trains individuals and organisations the right way. Following the correct guidelines and procedures as outlined by FeRFA, we are committed to excellence. We have a full life size driveway where contractors can practice laying resin bound on to concrete. We do not install on to plywood in our resin driveway training because it does not replicate a real life situation. Resin bound surfacing is the fastest growing sector of the construction industry. It is therefore important to choose resin training that will give you a competitive advantage and a platform to be the best you can be. We have trained some of the most successful resin installation companies in the country. Click to find out more on market-leading resin drive courses at The Resin Academy. Or alternatively, browse through our frequently asked questions in the education centre.

Find an elite installer

By selecting a Resin Mill approved installer, you can be assured your project is in the hands of an expert! Fill out the form and we will match you up with your nearest member of our Elite Contractor Programme. We don’t sell leads to installers, we pass them on based purely on their level of expertise, meaning you are guaranteed to get the best service available from an installer we trust