Bound Base PRO Aggregate Kit - 6-10mm 100kg
This 6–10mm Bound Base PRO aggregate kit supplies the stone component for a vehicle-use resin driveway base. Combine it with Bound Base PRO binder and install it as part of see more
This 6–10mm Bound Base PRO aggregate kit supplies the stone component for a vehicle-use resin driveway base. Combine it with Bound Base PRO binder and install it as part of the specified reinforced system beneath the decorative surface.
What is Bound Base PRO?
Bound Base PRO is a resin bound base course that provides a stable, permeable foundation beneath decorative resin bound surfacing. It combines Resin Mill’s single-part polyurethane binder with specified aggregates and is installed with 50kN structural reinforcement mesh above and below the base layer.
Designed as an alternative to a traditional asphalt or concrete base course, it forms part of the complete surface construction. It sits above a properly prepared, free-draining sub-base and beneath the decorative resin bound finish.
Why use Bound Base PRO?
- A permeable foundation: the base allows water to pass through into a suitably designed sub-base and drainage system.
- Quicker progression on site: a typical overlay time of 2 to 6 hours helps installers move on to the decorative surface. Catalyst can accelerate curing to help complete the full installation on the same day, subject to site conditions.
- Straightforward mixing: the single-part binder avoids measuring and combining separate resin components. Catalyst is added when required.
- Reinforced construction: the system uses 50kN Structural Reinforcement Mesh above and below the base course to help distribute loads and improve crack resistance.
Bound Base PRO is a base layer, not the finished wearing surface. Ground preparation, sub-base design and drainage must suit the site and intended traffic. Follow the full Resin Mill system specification.
Kit contents
- 4 × 25kg 6–10mm Bound Base Aggregates (100kg total)
Use with 4.5kg of Bound Base PRO binder, supplied separately. All heavy traffic and commercial applications require an additional 5kg of Binding Quartz.
When mixed with the specified binder, coverage is approximately 2.5m² with a capping layer. Without a capping layer, coverage will be approximately 10–15% lower.
Binder, mesh, capping-layer materials and the decorative resin bound top layer are not included.
Calculate how much of this product you need based on meters squared. We recommend increasing the total m2 of the area by 5-10% to allow for wasteage and uneven surfaces.
Fast Shipping
Place your order 12pm Monday to Friday to receive it by the next working day
Calculate how much of this product you need based on meters squared. We recommend increasing the total m2 of the area by 5-10% to allow for wasteage and uneven surfaces.
About Bound Base PRO Aggregate Kit - 6-10mm 100kg
This 6–10mm Bound Base PRO aggregate kit supplies the stone component for a vehicle-use resin driveway base. Combine it with Bound Base PRO binder and install it as part of the specified reinforced system beneath the decorative surface.
What is Bound Base PRO?
Bound Base PRO is a resin bound base course that provides a stable, permeable foundation beneath decorative resin bound surfacing. It combines Resin Mill’s single-part polyurethane binder with specified aggregates and is installed with 50kN structural reinforcement mesh above and below the base layer.
Designed as an alternative to a traditional asphalt or concrete base course, it forms part of the complete surface construction. It sits above a properly prepared, free-draining sub-base and beneath the decorative resin bound finish.
Why use Bound Base PRO?
• A permeable foundation: the base allows water to pass through into a suitably designed sub-base and drainage system.
• Quicker progression on site: a typical overlay time of 2 to 6 hours helps installers move on to the decorative surface. Catalyst can accelerate curing to help complete the full installation on the same day, subject to site conditions.
• Straightforward mixing: the single-part binder avoids measuring and combining separate resin components. Catalyst is added when required.
• Reinforced construction: the system uses 50kN Structural Reinforcement Mesh above and below the base course to help distribute loads and improve crack resistance.
Bound Base PRO is a base layer, not the finished wearing surface. Ground preparation, sub-base design and drainage must suit the site and intended traffic. Follow the full Resin Mill system specification.
Kit contents
• 4 × 25kg 6–10mm Bound Base Aggregates (100kg total)
Use with 4.5kg of Bound Base PRO binder, supplied separately. All heavy traffic and commercial applications require an additional 5kg of Binding Quartz.
When mixed with the specified binder, coverage is approximately 2.5m² with a capping layer. Without a capping layer, coverage will be approximately 10–15% lower.
Binder, mesh, capping-layer materials and the decorative resin bound top layer are not included.
Order before 12 pm for next-day delivery
Learn the trade at our state-of-the-art training facility
Incredible customer service and daily support available
Visualise your dream project before it is complete
Instructions
Read the full Bound Base PRO Installation Instructions in the Data Sheets tab before installing. The system requires 50kN reinforcement mesh below and above the base. We recommend ordering 10% extra mesh for overlaps, offcuts and waste: project area × 2 × 1.10. Use 4.5kg binder with 100kg aggregate, adding 5kg Binding Quartz for every heavy traffic and commercial batch. Catalyst is required below 15°C and may also be used throughout the product's 5–30°C application range to accelerate curing. Suggested dose: 1ml per 4.5kg binder pack. Typical overlay time is 2–6 hours, depending on conditions. Catalyst and mesh are supplied separately.FAQ'S
People Also viewed
£1,750.00
£1,975.00
£250.00
£80.00
£50.00
Driveway Visualiser
Find a design to suit your practical and aesthetics requirements whilst enjoying the quality' , durability and peace of mind that comes with a resin surface.
Free Samples
Our resin bound and bonded materials are supplied to some of the best known commercial contractors and wholesalers across the UK and Ireland
Find an Installer
We have a huge network of installers on hand to make your driveway dreams a reality
Customer Reviews
How did Resin Mill do…? Awesome! Every time I order from them I get exactly what I ordered and I get it quickly. I have built some cool driveways with this
The Resin Mill's products are top-notch! I used their resin bound materials for my driveway, and the quality was exceptional. The finished surface looks stunning, and the durability is impressive. Highly recommended!
I'm extremely satisfied with The Resin Mill's products. Their range of resin bound materials is more than enough to choose from and they provided me with sample choices to match my project needs. The support and guidance from their team made the installation process smooth and hassle-free.
RESIN BOUND KITS
Resin Mill is committed to providing carefully sourced and high-quality materials and Resin Rox, our new premixed aggregate product, is here to make installation of resin bound surfaces even easier.
REQUEST YOUR BROCHURE TODAY
CASE STUDIES
Property Exterior Trends for 2026 For Optimal Kerb Appeal
Spring is here, and with the new season comes well-intentioned plans to get our homes organised. Typically, Google searches for ‘spring cleaning’ spike in March (in the last 12 months, searches pea...
How Long Does a Resin Driveway Take To Dry?
Understanding how long a resin driveway takes to cure is essential for both installers and homeowners. Getting this right means: You’ll avoid damaging the surface before it’s ready. You’ll ensure ...
Resin Bound vs Resin Bonded Surfaces - Which is Best for Your Project?
Resin bound and resin bonded surfacing may sound very similar, but they are quite different in how they’re made and what they deliver. Both systems have been increasingly popular choices for homeow...
